# Access volume without a drive letter

**URL:** <https://forums.powershell.org/t/access-volume-without-a-drive-letter/9787>\
**Category:** PowerShell Help\
**Created:** [November 30, 2017, 9:10am UTC](https://forums.powershell.org/t/access-volume-without-a-drive-letter/9787 "2017-11-30T09:10:13Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![alexander-johansson](https://avatars.discourse-cdn.com/v4/letter/a/f05b48/32.png) [@alexander-johansson](https://forums.powershell.org/u/alexander-johansson)\
**Post date:** [November 30, 2017, 9:10am UTC](https://forums.powershell.org/t/access-volume-without-a-drive-letter/9787/1 "2017-11-30T09:10:13Z")

</div>

Hi,

If you have a volume, lets say D:, and then remove the drive letter, the volume still shows up if you use ‘Get-Volume’.  
The volume of course shows up with no drive letter but you can see it’s UniqueID, eg:  
UniqueId: \?\Volume{XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX}\

You can then copy and paste this UniqueID into a folder explorer and browse the volume with no problem.  
Is there a way to “cd”, or something similar, into this disk in PowerShell?

The question in short:  
I need to access the files on a disk, via PowerShell, with no drive letter assigned to it.

Thanks in advance.

---

<div class="post-metadata">

**Author:** ![donj](https://sea1.discourse-cdn.com/flex019/user_avatar/forums.powershell.org/donj/32/137_2.png) [@donj](https://forums.powershell.org/u/donj)\
**Post date:** [November 30, 2017, 9:12am UTC](https://forums.powershell.org/t/access-volume-without-a-drive-letter/9787/2 "2017-11-30T09:12:24Z")

</div>

You could try mapping a PSDrive (which would not be a “drive letter” assignment), using that “path” as the root. But PS can’t “change” to anything not represented by a PSDrive (which is not the same as a system-level drive letter on a volume).

---

<div class="post-metadata">

**Author:** ![alexander-johansson](https://avatars.discourse-cdn.com/v4/letter/a/f05b48/32.png) [@alexander-johansson](https://forums.powershell.org/u/alexander-johansson)\
**Post date:** [November 30, 2017, 9:33am UTC](https://forums.powershell.org/t/access-volume-without-a-drive-letter/9787/3 "2017-11-30T09:33:08Z")

</div>

Thank you for the quick reply!  
This solves my problem, so consider this question answered.

Thank you for your assistance.

---

<div class="post-metadata">

**Author:** ![dotnVo](https://avatars.discourse-cdn.com/v4/letter/d/4af34b/32.png) [@dotnVo](https://forums.powershell.org/u/dotnVo)\
**Post date:** [May 16, 2024, 8:37pm UTC](https://forums.powershell.org/t/access-volume-without-a-drive-letter/9787/4 "2024-05-16T20:37:08Z")

</div>

Closed on May 16, 2024, 8:37pm UTC


